What is a nylon spacer used for?

These spacers have a high mechanical strength. Some can be used as bushings, bearings, rollers and glides as well as spacers. Being inert to most natural environmental conditions makes Nylon Spacers useful in applications for medical and food sectors. Nylon can be recycled.

Can you cut nylon spacers?

The spacers can be cut easily and cleanly using electrician’s pliers, a sharp knife blade, shears, or anvil pruners. To prevent crushing the spacers when cutting, turn them on their edge rather than laying them flat. Cut the spacers for the top and bottom first, then measure and cut spacers for the sides.

What is a nylon spacer?

Nylon spacers can provide many different advantages when used in a fastener assembly. When installed properly, they seldom need replacement or updating and contribute to a low-maintenance fastener installation. They provide considerable strength and are suitable for use in heavy duty, industrial settings.

What is a nylon spacer made of?

Nylon 6/6
Our Standard Nylon Spacers are made from a premium quality Nylon 6/6 and are a great cost effective solution in comparison to their metal counterparts, being lighter weight, more temperature …

Are nylon spacers strong?

This is not unreasonably low, as other common engineering plastics such as PVC and polypropylene have an ultimate tensile strength of 9,580 and 5,800 PSI respectively. However, nylon fasteners are certainly not the strongest available nor are they as strong as metal fasteners.

Are spacers the same as washers?

Washers and spacers are generally the same thing. Only difference is that spacers have a certain thickness so that they can be used to space something a certain amount. They are consistent in that thickness where washers aren`t. For adapter bolts, they are likely just washers.

Are nylon spacers flexible?

First, nylon offers a great deal of flexibility and is ideal for use in a wide variety of applications. And because nylon is non-corrosive, antimagnetic, and resistant to friction and vibration, these washers can withstand a good deal of wear and tear and movement without becoming damaged or compromised.

What goes first spacer or washer?

When used correctly, a lock washer will hold the nut or other threaded fastener in place. To help it accomplish this, put the lock washer on first, below the fastener. If your project calls for other washers or hardware elements, they should go on before the lock washer so that it can hold them in place.

What is the difference between a shim and a spacer?

While shims typically feature a thin profile, spacers are designed with a much wider range of thicknesses from several inches to several feet depending on application requirements. Spacers can also be purposed as sleeves, bushings, axles, or pins.