How much is a Suzuki King Quad 750 worth?

Values

How do I know if my ATV clutch is bad?

Signs of an abused clutch are 1) Shifting under power is difficult and neutral is hard to find. 2) The machine still moves forward with the lever pulled in. 3) In gear, the engine revs high and the vehicle barely moves. 4) A putrid burning smell seeps from the engine.

Why does my ATV belt keep breaking?

Belt disintegration, AKA when a belt has broken into several smaller pieces, can happen thanks to repeated shock-loading or excessive belt speed. Intense heat buildup caused by extreme driving conditions – like when your machine is stuck in mud or sand with ample wheel spin – doesn’t help, either.

What is the most common cause of belt slippage?

Improper belt tension is the most common and obvious cause of slip, which generates unwanted heat. The friction that occurs when a V-belt slips in a pulley causes belt sidewalls to become glazed, and decreases gripping ability.

What can be the reason for the belt slippage?

Belt slippage occurs whenever torque demand exceeds the available friction between a V-belt and one or more of the pulleys (sheaves). When this occurs, the belt begins to slide backwards a bit as it moves with the pulley.

How often do CVT belts need replaced?

Most manufacturers fall into a range between 30,000 and 50,000 miles. Many car owners find that their manual doesn’t specify a time. If this is the case, a good rule of thumb is around 50,000 miles. To check the whole system you will need a mechanic to lift the vehicle and get underneath it.

What happens when CVT belt breaks?

If the belt breaks, you could be left stranded on a trail ride or quickly DNF a race. There are many ways to prolong belt life that depend on proper break-in, using the correct clutch set up and most importantly driving style.

Does Suzuki make quads?

QuadSport Z90. The Suzuki QuadSport Z90 is the ideal Fun ATV for young riders to develop their skills with. Convenient features like an automatic transmission and electric starter help make this ATV suitable for supervised riders ages 12 and up.

How do you fix a slipped belt?

The airflow from the venting system will gradually dry up the belt and clutches. In just a couple of minutes, you should be able to start riding again gently. Start at low speeds with little power to let it dry completely. If you hammer it right away, it will start slipping, potentially damaging the belt in just a matter of seconds.

Why does my ATV have belt slippage?

A wide variety of reasons may be causing it, where most of them are just a normal part of owning an ATV. Other times it may be a sign of severe damage to the clutches, and expensive components may be necessary to fix the issue. I recently experienced belt slippage on my own bike (Polaris Sportsman XP 1000).

Is your CVT belt slippage normal?

CVT belt slippage will likely happen to anyone owning an ATV sooner or later. While as frustrating as it might be, there is often no reason to let it ruin your day. A wide variety of reasons may be causing it, where most of them are just a normal part of owning an ATV.

Does your Polaris Sportsman XP 1000 suffer from belt slippage?

I recently experienced belt slippage on my own bike (Polaris Sportsman XP 1000). I was out trail riding with some friends when we decided to go up a small river. The water in the river was only in the ballpark of 15-20 inches deep. I expected my trusty Sportsman would have no problems handling it.