How do I put the paper tray back in my Brother printer?

Loading paper in paper tray

1. Pull the paper tray completely out of the machine.
2. Open the output paper tray cover (1).
3. Gently press and slide the paper guides (1) to fit the paper size.
4. Fan the stack of paper well to avoid paper jams and misfeeds.
5. Gently put the paper into the paper tray print side down.

Where do I load paper in MFC printer?

Load paper in the paper tray with the printing surface face down. Make sure the paper is below the maximum paper mark ( ). Overfilling the paper tray will cause paper jams. Slowly push the paper tray completely into the machine.

How do you put paper in a brother Tray 1?

Make sure the paper guides touch the edges of the paper and the paper is flat in the tray. Replace the tray top cover. Slowly push the paper tray completely into the machine. DO NOT push the paper tray into the machine forcefully or quickly.

How do I install a printer tray?

Introduction

1. Grasp the handle on either side of Tray 1, and pull it forward to open it.
2. Pull out the tray extension to support the paper.
3. Spread the paper guides to the correct size, and then load paper in the tray.
4. Adjust the side guides so that they lightly touch the paper stack, but do not bend it.

Where is the paper tray on a printer?

Paper is housed in the printer’s paper tray, and most trays can be found along the bottom of the printer. There is usually a small notch on the face of the tray that pulls out so you can insert the paper.

What to do when your printer says there is no paper?

If you keep on getting error messages saying there is no paper in the printer, check the paper rollers and clean any specks of dust or debris. Also, make sure the paper stack is not wrinkled or bent. Take out the stack of paper and push the tray back in. Take it out again and put back the paper.

Why is the Brother printer not printing?

Difficulty printing from your PC can occur for various reasons. The most common reason a networked Brother machine may stop printing, is because the connection between the computer and the Brother machine is lost. This can occur as a result of wrong settings or configuration of the printer driver.

What does MP tray mean on printer?

the Multi-purpose Tray
Use the MP Tray for special print media, such as photo paper or envelopes. If the [Check Paper] setting is set to [On] and you set the paper in MP tray, a message appears on the LCD asking if you want to change the paper type and paper size.

Does paper tray detect paper type?

The tray that contains paper of the size and type selected in “Paper Size” and “Paper Type” is automatically selected to print data. If “Paper Source” is not set to [Auto Select] in “Paper Selection”: Data is printed on the paper loaded into the specified tray regardless of the setting of “Paper Size”.

What is the tray on a printer?

The printer has five paper trays: Tray 1 is an adjustable paper tray for loading a range of paper sizes. For the 3-Tray configuration, Trays 2, 3, and 4 are adjustable trays similar to Tray 1.

How do you open a paper tray on a printer?

Remove any paper or other obstructions from underneath the printer and inside the gap where the input tray slides into.

1. Press the Power button to turn off the printer.
2. Grasp the handle on the input tray, and then pull the tray toward you to open it.