What is a Type 6 wildland fire engine?

Type 6. An initial attack wildland engine with a minimum pump capacity of 30 GPM. 150-400 gallon tank. 300 feet of 1 1/2″ hose.

What is a Type 6 brush truck?

Type 6 Wildland Brush Trucks Designed for the rigors of off-road firefighting, these Type 6 fire engines feature ladder-style sub frames and spring-loaded body mounts in custom flatbed or rescue-style configurations.

What tools are on a ladder truck?

When you think about it, most fireground truck work is performed with only a few tools: the Halligan, axe, can, thermal imaging camera (TIC), hook, ground ladder(s), saws and smoke ejector/blower.

What is a McLeod tool used for?

The McLeod tool is a combination of a hoe and a rake and can be used for clearing brush and debris as well as constructing fire lines. The McLeod’s head can be secured with a nail to prevent any twisting or movement while you work.

How many gallons does a Type 6 engine have?

Type 5, Type 6, and Type 7 Fire Engine These fire engines have a much smaller configuration than a typical Type 3 or 4 engine. The smaller body still allows the department to carry 50 to 400 gallons of water with the maneuverability and accessibility that you don’t have in Type 3 or 4.

How much does a Type 6 fire engine cost?

A new Type 6 engine will cost you around $85,000, plus another $7,500 for equipment. At that point, you will be required to outfit your firefighters with wildland fire PPE, fire shelters, etc., at around $1,500 each.

How much does a Type 6 engine cost?

around $85,000
A new Type 6 engine will cost you around $85,000, plus another $7,500 for equipment. At that point, you will be required to outfit your firefighters with wildland fire PPE, fire shelters, etc., at around $1,500 each. New field-programmable, narrowband radios, like a Bendix King are around $2,000 each.

What is a Type 5 wildland engine?

Type 5—Normally an initial attack engine on a medium duty chassis. GVWR of the chassis is in the 16,000 to 26,000 pound range. Type 6—Normally an initial attack engine on a medium duty chassis. GVWR of the chassis is in the 9,000 to 16,000 pound range.

What tools does a fire engine have?

Standard tools found on nearly all fire engines include ladders, hydraulic rescue tools (often referred to as the jaws of life), floodlights, fire hose, fire extinguishers, self-contained breathing apparatus, and thermal imaging cameras.

Which of the following tools are carried on the Type 3 engine?

Type 3 engines carry a wide assortment of equipment including driptorches, backpack and floating pumps, and Class A foam. Type 3 engines also carry a complete Advanced Life Support (ALS) equipment compliment.

What is a fire rake used for?

Typically, fire rakes are used to rake firebreaks, as their sharp blades allow them to access fire that has spread in undergrowth. They are also useful for loosening surface debris. As such, fire rakes are generally implemented in mop-up, burning-out, and fireline construction operations.

Who invented the McLeod tool?

Malcolm McLeod
The combination tool was created in 1905 by Malcolm McLeod, a United States Forest Service ranger at the Sierra National Forest. The McLeod was originally designed to rake fire lines with the teeth and cut branches and sod with the sharpened hoe edge.

What kind of engines are used for wildland fires?

Type 3 and Type 6 engines are the most-used engines for wildland urban interface fires and are known for their off-road and maneuverability capabilities. CAL OES Strike Team with personnel from Fremont, Hayward, Alameda and Oakland fire agencies.

What is a type 6 wildland engine?

Our Type 6 wildland engines can be equipped with a proprietary composite apparatus body, custom-built Galvanneal steel, stainless, aluminum, or combinations of these to accommodate the variations an agency/department needs.

What are the different types of hand tools for wildland fire fighting?

We’ll be covering three types of hand tools: cutting tools, scraping tools, and fire swatters. Let’s start by taking a whack at cutting tools. You will use cutting tools primarily for fireline construction, including cutting brush and small trees. The most common hand cutting tools for wildland fire fighting are:

Why choose a type 6 wildland brush truck?

Our Type 6 brush trucks are made of a lightweight composite material that will never rust or corrode, adding years of useful life compared to the heavier all-metal construction of other brush trucks. Our Type 6 wildland engines are in service daily throughout the nation in some of the most challenging wildland settings imaginable.