Why is my iRobot Braava not working?

Why is my iRobot Braava not working?

For some errors, rebooting Braava jet may resolve the problem. To reboot Braava jet, press and hold CLEAN for 5 seconds until you hear an audible tone. Take out the battery and insert it again. Press CLEAN again to turn the robot back on.

How do you reset Braava mop?

For the Braava jet m Series, press and hold the CLEAN button on your robot for 20 seconds. When the button is released, the light ring around the tank lid will swirl clockwise in white. It can take up to a minute and a half for the robot to turn on. The reboot procedure is complete when the light ring shuts off.

Why is my Braava jet not charging?

Introduction. If your iRobot Braava Jet 240 battery does not charge when in the charging cradle, your battery might need to be replaced. Over time, recharging causes the battery to lose the ability to hold a charge, meaning it will need to be replaced.

How do you unclog a Braava jet?

Clogged Nozzle on Braava Jet 240

  1. Removed the nozzle from the unit.
  2. Soaked the nozzle in white vinegar (>4 hours).
  3. Soaked the nozzle in CLR (>12 hours).
  4. Flushed the nozzle with both white vinegar and CLR.
  5. Put the nozzle under vacuum to dislodge the clog.

What does the red light on Braava jet mean?

Solid white: Fully charged. Pulsing red: Charging, too low to start cleaning. Solid red: Error (tap Clean for details). Red sweep toward rear: Empty the bin.

Why does my iRobot says not connected?

If the Roomba app says not connected, check if your mobile and Roomba are connected to the same network. You should also check if your Wi-Fi is working; you can do so by connecting it to another device. Moreover, to ensure maximum signals, place Roomba and the Home Base docking station close to the router.

How do I reset my Braava battery?

Soft Reset iRobot Braava Jet m6

  1. Locate the “CLEAN’ button on top of the device.
  2. Press and hold about five seconds.
  3. Keep holding this button in position until you hear a tone.
  4. Afterward, remove the battery and put it back in.
  5. Lastly, press the ‘CLEAN” button to restart your Braava Jet m6.

Why is Roomba beeping while charging?

As your iRobot is continuously making this tune, even whilst charging, this would suggest that either: the battery is not taking on any charge (i.e. it is dead), or; the charging circuitry (within the iRobot) is not detecting the charge current, and assumes that it is not plugged in.

How do I know if my iRobot is charging?

Charge Roomba using the Home Base. Indicator lights will turn off after 60 seconds to conserve energy while Roomba is charging. Check status of the battery by pressing the CLEAN button to illuminate the Battery Indicator. Indicator will appear amber while the battery is charging and solid green when fully charged.

Can I use vinegar in Braava jet?

Vinegar is not an approved cleaning agent to be used in any Braava product as it can cause damage to the internal mechanisms of the robot.

Why is my iRobot Braava not cleaning properly?

If you are not using authorized iRobot Braava cleaning clothes, try switching the clothes supplied with your Braava to see if the issue persists. NOTE: White clothes are for sweeping and blue clothes are for mopping. Ensure that cloth is properly attached, it should not bunch or overflow into the middle channel.

How do I know if my Braava needs to be replaced?

Verify your Braava is using an authorized iRobot battery and charger. If so, your Braava could have a defective battery that needs to be replaced. Your Braava is having trouble moving and does not display a red Navigation System Indicator. Ensure that the tire tread is properly attached and does not move around.

What should I do if my iRobot Braava tire tread is loose?

If tire tread is loose or missing, consider replacing the wheels. Turn each wheel to ensure that they have the same resistance, if not, rotate each wheel for 15 seconds in both directions. If you are not using authorized iRobot Braava cleaning clothes, try switching the clothes supplied with your Braava to see if the issue persists.

Why can’t I charge my Braava?

Your Braava is unable to be charged. Ensure that you are using an authorized iRobot charger and battery. Verify that the outlet is working by trying another appliance in the same outlet, or try the charger on a known working outlet. NOTE: If the outlet is connected to a dimmer, the charger may not work.