What CC is a Honda CL?
What CC is a Honda CL?
Honda CL 350
Make Model | Honda CL 350 |
---|---|
Capacity | 325 cc / 19.8 cu-in |
Bore x Stroke | 64 X 60.5 mm |
Cooling System | Air cooled |
Compression Ratio | 9.3:1 |
Does Honda make a 175?
Featuring Honda technologies such as Programmed Fuel Injection, the model maintains smooth, even power output through the entire speed range….Honda Introduces the New BF175 4-stroke Marine Outboard Motor.
Model | BF175A |
---|---|
Maximum Power Output [kW(PS)/rpm] | 128.7(175)/5,500 |
Maximum torque [Nキm(kgfキm)] | 265(27.0) |
Recommended Speed Range (rpm) | 5,000 – 6,000 |
How fast will a Honda 175 go?
Honda CB175
Manufacturer | Honda |
---|---|
Engine | 174.1 cc (10.62 cu in) air-cooled parallel twin |
Bore / stroke | 52 mm × 41 mm (2.0 in × 1.6 in) |
Compression ratio | 9:1 |
Top speed | 86 mph (138 km/h) |
What does Honda CL stand for?
Honda used the “CL” model prefix to denote their scrambler series, engine sizes ranged from 50cc all the way up to 450cc, and typically the CL model was a scramblerized version of the parallel street model with a “CB” designation.
How much does a 175 hp Yamaha outboard weight?
386 lbs
Specs & Compare
Engine Type | Inline 4 |
---|---|
Weight † | 171 kg (377 lbs) – 175 kg (386 lbs) |
Recommended Fuel | Octane 87 |
Recommended Engine Oil | Yamalube® 4M (See owner’s manual) |
Recommended Fuel Filtration | Yamaha 10-Micron Fuel/Water Separating Filter (external) |
What is the difference between Honda CB and CL?
Rider foot peg bar, the CB’s were wider, also to clear the pipes. The left rear passenger peg on the CL is offset to clear the high exhaust. The handle bars are different, the CLs had the cross bar. The front wheel is a 19″ on the CLs and an 18″ on the CBs.
Does Honda make a scrambler motorcycle?
Honda motorcycles are popular platforms for scrambler builds. In particular, the single cylinder Honda “thumpers,” such as the XR series and the ever-popular NX650 Dominator, make bulletproof, hard-to-kill scramblers that can jump curbs in the city and tear up country roads, paved and unpaved.
What does GT stand for in motorcycles?
GT standing for the initials of its founder, Gary Turner. Richard sold his bike shop and began selling frames as fast as possible to bicycle distributors across the USA and into Europe.
How many miles does a 1972 Honda CL 175 have?
For sale: 1972 Honda CL 175 w/ 7,000 original miles and clean title. Good condition. Ran when parked in 2013. Comes with complete spare parts bike. Cool vintage cycle in really nice shape. Just serviced, she starts and runs great! Super fun lil’ bike! All stock, including the ‘Scrambler’ exhaust! New tires and battery.
How many miles did your Honda cl-175 scrambler last?
1972 Honda Cl-175 Scrambler, 5750 actual miles, 700 miles on a newly rebuilt engine. I changed the oil at the 500 mile mark. I ride it almost daily putting on between 20-45 miles each day. The engine rebuild includes new pistons, rings, timing chain, and the carbs were also rebuilt. The bike is all original, nothing custom or funky. Runs great!
Who is the owner of a 1970 Honda cl175k4 scrambler?
Year/Model: 1970 Honda CL175K4 Scrambler, Owner: Bob Duncan, Atascadero, California. There certainly were lots of variations of Honda’s 175 twin over its six years on the market, from Super Sport to Motosport, with the Scrambler sitting right in the middle.
How much did a Honda CL200 cost in 1973?
The CL street scrambler soldiered on through 1973, price going up to a mildly inflationary $715. Then the engine got bored out another 3.5mm, now seriously oversquare, raising the ante to 198cc and called, quite naturally, the CL200.