Should you fill concrete expansion joints?

After a joint is established, it needs time to activate as the slab cures. Ideally after 90 days, the joint should be filled or sealed. Joint filling is done the full depth of the joint while sealing is only done over the surface level with a flexible material over a rod to help keep the proper shape of the joint.

Should you fill expansion joints in driveway?

Even expansion joints in your concrete driveway should be caulked. They can be the biggest culprit of water under your slabs. Notice how the caulking is slightly lower than the concrete slab around it. This protects the caulk from wear and tear of people walking and driving over it.

Can you add expansion joints after concrete is poured?

You can install concrete expansion joints before or after the concrete is laid. In the first instance, a flexible material is inserted along the length of the joint before the concrete is poured [link to how to lay a concrete slab].

Should expansion joints be filled before epoxy?

Some people will consider filling the joints before the epoxy coating is applied. It might sound like a good idea, but if the joints are filled with a solid material and then covered with epoxy, it defeats their purpose. Improperly filled expansion joints is where the chips and cracks in floors are born.

What happens if you don’t put expansion joints in concrete?

If you have a concrete floor in your commercial building, you know expansion joints are necessary to allow for the natural expansion and contraction that occurs from temperature changes. Without these joints, large cracks can travel across your floor, creating costly damage.

How do I fill the seams in my driveway?

The best way to repair your expansion gap is to use purpose-designed foam backer rods and self-leveling caulk. Both materials are available in most home improvement stores. Cut your foam backer rods to the proper length for your expansion gap and press them into the gap.

What material is used for expansion joints in concrete?

Minimize Concrete Cracking and Damage with Expansion Joints. ASPHALT EXPANSION JOINT is composed of a blend of asphalts, vegetable fibers, and mineral fillers formed under heat and pressure between two asphalt-saturated liners. It is waterproof, permanent, flexible, and self-sealing.