Is a gas log splitter better than electric?

Gas splitters, like the Iron and Oak 30 ton wood splitter, usually pack a little more punch than an electric splitter, allowing you to take on bigger logs. While gas splitters are usually a little heavier than electric, you are not tethered by the needs of an outlet, giving yourself greater range and portability.

How much horsepower do you need for a log splitter?

If you are serious about making your own backyard log splitter, then you want to have, at a minimum, the following components to provide the right amount of force and power for basic splitting of averaged sized, seasoned logs: A 5 Horsepower engine. A two-stage hydraulic pump rated at a max of 3 gpm at 2,500 psi.

Is kinetic or hydraulic log splitter better?

The most obvious and biggest advantage to hydraulic log splitters, is that generally they are a lot more powerful, and can split larger logs then their kinetic counterparts. Hydraulic systems have an easier time getting through knotty woods, and will struggle far less on hard woods.

Are electric wood splitters worth it?

I think the simplest answer to the main question of are electric log splitters any good is yes they are. They have a lot to offer and have some of those really excellent advantages that a gas splitter can’t offer and never will be able to. While an electric splitter can get more powerful and close that gap.

What is the RAM on a log splitter?

The ram stop is used to shorten the return distance of the log splitter.

How much HP does it take to run a hydraulic pump?

1 HP is required for each 1 GPM at 1500 PSI or any multiple of 1500 such as 3 GPM at 500 PSI, 2 GPM at 750 PSI, 1/2 GPM at 3000 PSI, etc. Another handy rule-of-thumb is that it takes about 5% of the pump maximum rated HP to drive the pump when unloaded and pressure is very low.

Is it cheaper to build a log splitter?

As with many of these DIY log splitters, you might have to spend a little cash for the basic components, but when you consider that buying a log splitter can cost upwards of $1,000, constructing a machine such as this is still a very economical alternative.

Are electric wood splitters any good?