How do you tell if my Jeep has a Dana 44?

There are a few things that can help you tell if the axle is a Dana 35 or a Dana 44. The easiest way to tell these axles apart is to look at the shape of the differential cover. The Dana 35 cover is pretty much perfectly round. The Dana 44 is sort of a six-sided shape.

How do you tell if you have a Dana 30 or 44?

The quickest way to tell is to look at the top of the steering knuckles where the Front End Housing is connected to the Knuckle. On a Dana 44 Model, you will see a large castle nut threaded onto a ball joint. For Dana 30 Models, you will see a king pin cap with four bolts threaded down into the top of the knuckle.

What axle is in a Jeep Liberty?

The Chrysler 8.25″, also known as the Corporate 8.25″, is the 29 spline steel rear axle found in most Jeep Liberties.

How do I identify my Dana axle?

The Bill of Material (BOM) number is used to identify Dana differentials. The BOM will identify the model number, the gear ratio, the type of differential, and all component parts. Traditional BOM’s are 6 digits followed by 1 or 2 digits and start with the numbers 60 or 61.

Is Jeep Liberty solid axle?

The Liberty also has a three-link solid rear axle, unibody frame construction, four doors, and an obviously Jeep-inspired grille. Most Liberty models served time as commuter cars with a few actually getting used to their full potential.

What gear ratio does a Jeep Liberty have?

Stock Gear Ratio Table

How do I identify a Dana 44 front axle?

Many Dana axles have the model ID cast into the fins or centersection. Look for a “44” or “60” cast into the reinforcement ribs. The number can usually be found on the lower right side rib below the differential cover, but it may also be found on other ribs or on top of the main cast structure.

What vehicles have a Dana 44 front axle?

The Dana 44 was introduced after World War II and is commonly found under the front and rear of a wide variety of Jeeps, as well as International Harvester, Dodge, Studebaker and Ford trucks, and even under the rear of Isuzu Rodeos and Honda Passports up until the mid-’90s.

What vehicles came with a Dana 44 front axle?

What size is a Dana 44 rear axle?

Dana 44: These are the beefier axles found on the rear of all Wrangler models now with either a 3.21 or 3.73 gear ratio. The Dana 44 ring gear size is 8 ½ inches. Rubicon models come standard with a 4.10 rear gear ratio and also use a Dana 44 axle in the front with either a 3.73 or 4.10 gear ratio. The width of the axle shafts is 1.31 inches.

What is the gear ratio on a Dana 44 Jeep Wrangler?

They came with either a 3.21 or 4.10 gear ratio. The width of the axle shafts is 1.13 inches. Dana 44: These are the beefier axles found on the rear of all Wrangler models now with either a 3.21 or 3.73 gear ratio. The Dana 44 ring gear size is 8 ½ inches.

What is the difference between a Dana 30 and Dana 44?

Aside from the Dana differential covers, the biggest difference between the axles is the size. The number in the name (Dana 30, Dana 44, etc.) is in reference to this. Dana 30: This axle size is the most common, and you’ll only find it on the front of Jeep.

What does Dana mean on a Jeep Wrangler?

The Dana portion is the name plate of Dana Inc., who is the manufacturer of the axles used on Jeeps. There have been a few different axles used in Wranglers over the years with the Dana 44 being the most popular axle to come stock.