Lifehacks

How do I reset my drum unit?

by author

How do I reset my drum unit?

If you reset the drum counter during the life of the drum unit currently being used, the remaining drum life will not be displayed accurately.

  1. Make sure that the machine is turned on.
  2. Open the front cover.
  3. Press and hold OK for 2 seconds.
  4. Press the Up arrow key or 1 to reset the drum counter.
  5. Close the front cover.

How do I reset my drum imaging?

Reset Life Counter

  1. With the power on, open the front door.
  2. Press and hold the cancel button (X). After a few seconds, the printer will flash its indicator lights telling you it’s resetting the life counter.
  3. Close the front door.
  4. The printer should restart automatically.
  5. Enjoy your new imaging unit!

How do I check drum life on Oki printer?

You can set when to display the “Image Drum Near Life” message. Press [Device Settings] > [Admin Setup] > [User Install] > [Drum Near Life Timing] on the touch panel to change the setting. Available values are from 500 to 3,000 (in 500 increments).

How do I clear the message drum Error Slide the Green tab?

How to clear error message “Slide the Green tab on Drum Unit”?

  1. Take out the drum unit and toner assembly.
  2. Clean the electrodes with a soft cloth.
  3. Gently slide the green tab from side to side several times, and return it to the home position at the far left.
  4. Re-install the drum unit.

What is a drum error on a printer?

Drum Error typically appears when the corona wire on the drum unit needs to be cleaned or when the drum unit needs to be replaced. If you replaced the drum and the message appeared or continued to appear immediately after installing the replacement drum, click here. 1. Clean the corona wire inside the drum unit.

Why does my printer still say replace drum?

Without a chip, your drum unit has no way of being able to associate itself with your Brother printer. As a result, you will get the “Replace Drum” message because your printer thinks that you’ve not installed a drum unit. On the right is a standard toner cartridge with a chip.

How do I reset my Oki mc363 printer?

You can restore the network settings to the factory default settings.

  1. Press [Device Settings] on the touch panel.
  2. Press or several times and press [Admin Setup].
  3. Enter the administrator name and password and press [OK].
  4. Press [Network Menu].
  5. Press [Network Setup].
  6. Press [Factory Defaults].
  7. Press [Yes].

How do I change the drum on my printer?

  1. Make sure that the machine is turned on.
  2. Open the front cover.
  3. Take out the drum unit and toner cartridge assembly.
  4. Push down the green lock lever and take the toner cartridge out of the drum unit.
  5. Unpack the new drum unit.
  6. Put the toner cartridge firmly into the new drum unit until you hear it lock into place.

How do you clean an OKI printer drum?

ANSWER

  1. Insert your finger into the recess on the right side of the machine and pull the front cover open lever (1) to open the front cover (2) forward.
  2. Press the open button (3) and open the output tray (4).
  3. Remove the image drum.
  4. Wipe the light-shielding film (5) with soft tissue paper.

How do you reset the image drum on a OKI printer?

ANSWER

  1. Start the Status Monitor for the printer.
  2. Click on Printer Setup tab – Printer Menu button – Maintenance 1 tab.
  3. Click the [Reset] button next to Drum Counter, then click on the [OK] button to reset the drum counter.

How do I reset the drum count on an OKI B4200 printer?

A few older OKI Data “B” series printer, such as the B4200, ship with a Status Monitor application for Windows that you can use to reset the drum page count. To use the Windows utility to reset the drum count, open the “Status Monitor” application, click the “Printer Setup” tab, select “Maintenance,” and then click “Maintenance 1.”

How do I restart my Oki Data printer?

Press the “Online” button again to return the OKI Data printer to normal printing mode. Power off the printer if you have not already done so. Press and hold the up and down arrow buttons simultaneously as you press the “Power” button to restart the printer. The “OKI USER” prompt appears on the LCD display screen.

How do I reset the drum count on a brother printer?

Press the “Online” button near the display panel on the top of the printer to take the unit offline. Press the “Menu” button a few times until the Maintenance Menu option appears on the display panel’s LCD screen. Press the “Select” button, and then press “Item” repeatedly until the Drum Count Reset menu option appears.

How do I restart my Okoki C series laser printer?

OKI Data “C” Series Laser Printers Step 1 Power off the printer if you have not already done so. Press and hold the up and down arrow buttons simultaneously as you press the “Power” button to restart the printer.

https://www.youtube.com/watch?v=1ZTHsY2CN7Q