How do I fix my USB ports not working on my HP laptop?

Here’s how:

1. Remove ALL the USB devices from your HP laptop.
2. Power off your laptop and disconnect it from power supplies.
3. Carefully remove the battery from the back of the laptop.
4. Wait 10 minutes before you seat the battery back in.
5. Insert ALL the USB devices and recharge your PC.
6. Restart your PC.

Why are USB ports not working?

The USB device may become unresponsive because of a race condition in the Selective Suspend feature. The Selective Suspend feature suspends the USB device to efficiently maintain battery power by enabling the computer to turn off the USB device. However, sometimes this feature may not correctly wake up the USB device.

Why is my HP docking station not working?

If you are experiencing problems with your docking station, clean the connections of the station. Accumulated dust and particles in or around connectors on the docking station can cause connection problems between the computer, external devices, and the docking station. Undock the computer from the docking station.

How do I activate the USB ports on my monitor?

How Do I Use USB Ports On My Monitor?

1. Turn off your PC.
2. Locate the square-shaped Type-A port on your monitor.
3. Connect the type-B end of the cable to the type-B port on your monitor.
4. Connect the type-A end of the cable to one vacant type-A port on your PC.
5. Switch on your computer.
6. Go to settings and add a USB device.

How do I get my USB ports to work on my monitor?

How to Activate USB Ports on a Monitor

1. Turn off your computer, and then locate the square-shaped Type-B USB port on your monitor.
2. Connect the Type-B end of the USB cable into the Type-B USB port on your monitor, and then connect the other rectangle-shaped Type-A end of the cable into a vacant USB port on your computer.

Why won’t my laptop recognize my docking station?

Verify if the device is detected in Windows Device Manager and that the correct device drivers are installed. Ensure that the docking station is connected securely to the notebook laptop. Try to disconnect and reconnect the docking station to the laptop. Check the USB ports.

How to fix USB ports not working on HP laptop?

[Solution] USB Ports not Working on HP Laptop 1 Open Device Manager. 2 Expand category “Universal Serial Bus controllers”. 3 Double-click the “USB Root Hub” device, and click the Power Management tab 4 Turn off the Allow the computer to turn off this device to save power option, and click OK button. See More….

How to fix USB ports on the dock do not work?

HP Notebooks PCs – USB Ports On The Dock Do Not Work While Computer is Docked. 1 Click Start. 2 Locate and open the Thunderbolt Software application. 3 Click on Not Connected . 4 Locate Select the devices you wish to connect. 5 Select Always Connect from the drop down menu. 6 Click OK . See More….

Why is my hp docking station not working?

The most common one is the HP docking station not working properly. Of course, there are reasons behind the issues such as faulty docking station, laptop unable to recognize the docking station, flickering monitor screen, the docking station not recognizing the computer and many more. All the best possible solutions are given below.

Why is my Thunderbolt device not connecting to the dock?

This is caused by a disconnection between the Thunderbolt software and the dock station. Locate and open the Thunderbolt Software application. Click on Not Connected . Locate Select the devices you wish to connect. Select Always Connect from the drop down menu. Click OK . Figure 1.